Environmental Field Services | Diversified Drilling

Soil vapor sampling is a technique used to collect samples of soil gas from the subsurface. The technique involves inserting a soil vapor probe into the ground and extracting a sample of the gas that is present in the soil pores. The collected samples are then analyzed in a laboratory to determine the presence and

Sub-slab vapor pins are a type of vapor pin that are installed underneath the concrete slab of a building to sample for the presence and concentration of volatile organic compounds (VOCs) in the soil vapor. Sub-slab vapor pin installation is a common method of assessing indoor air quality in buildings located on or near contaminated

Dual-phase vapor extraction (DPVE) is a variation of soil vapor extraction (SVE) that is used to remediate soil and groundwater contaminated with volatile organic compounds (VOCs). DPVE is a two-phase system that simultaneously removes VOCs from both the soil and the groundwater, which makes it more effective than SVE alone for sites where both media

Soil vapor extraction (SVE) is a common method of soil remediation used to remove volatile organic compounds (VOCs) from contaminated soil. SVE is an in situ (in-place) treatment technique that involves the extraction of contaminated vapors from the soil using a vacuum system. SVE is effective for treating soils contaminated with low to moderate levels

Environmental pilot testing is a process used to evaluate the effectiveness of environmental control technologies or strategies on a small scale before implementation on a larger scale. The purpose of pilot testing is to identify any issues or problems that may arise during implementation and to refine the technology or strategy to optimize its effectiveness.